| |
MODEL 9082
ACCEPTS
8-PIN S.O.I.C.
PROVISION FOR COMPONENTS ON EACH SIGNAL LINE
BYPASS CAPACITOR OPTION ACROSS I.C. TERMINALS 4 -8
|
|
PINS
ON .100 in. (2.54 mm) CENTERS MAKE YOUR ASSEMBLY COMPATIBLE WITH
TRADITIONAL BREADBOARDS,
SOLDERLESS
BREADBOARDS, AND SOCKETS |
| The 9082 accepts an 8 Pin S.O.I.C. and in
line 0805, 1206, Mini-Melf, and other components may be mounted, or a jumper may be used
if a direct connection is desired. A pad set is provided between I.C. pins 4 and 8 if a
bypass capacitor is desired in cases where the I.C. uses these pins as power and ground.
Board accepts industry standard 8-pin S.O.I.C. See drawing below . |
|
See the HOW - TO
page for useful hints and suggestions for using Surfboards.
View the PDF data sheet for pin and board specifications, tolerances and
full details
PDF DATA SHEET |
|
PDF PRINTING NOTE: If your
printed version of this data sheet shows solid areas in place of graphics, or the graphics
do not appear correct, Try printing them with your printer set up for RASTER mode. Pdf files from this site work best with Adobe Acrobat
3.0 or Higher. See the " Get Acrobat" link at page bottom go to the Adobe site
to get your free Reader.
|
|
|
