MODEL 9161
ACCEPTS ONE 14 or 16
PIN S.O.I.C.
OR TWO 8-PIN SOICs
|
GENERAL PURPOSE SURFACE MOUNT BREADBOARD
|
The model 9161 provides
peripheral mounting areas for a range of surface mount devices including 0805, 1206,
Mini-Melf, a-b case tantalums, and many others. Foil areas accept parts both in the signal
lines to the I.C., as well as across adjoining foil areas. (see below)
 |
|
Simple easy
FOIL MODIFICATIONS
increase the range of devices that can be mounted. |
|
| 
|
See the HOW - TO page for useful hints and suggestions for
using Surfboards. View the PDF data sheet for full details
including board specifications and tolerances.
PDF DATA SHEET
|
Board accepts industry standard SOICs. Use for one 14 or 16 pin, or two 8 pin ICs.
Board may be glued or attached to ground planes for enhanced R.F. characteristics. See GROUND PLANES. |
PDF PRINTING NOTE: If your
printed version of this data sheet shows solid areas in place of graphics, or the graphics
do not appear correct, Try printing them with your printer set up for RASTER mode. Pdf files from this site work best with Adobe Acrobat
3.0 or Higher. See the " Get Acrobat" link at page bottom go to the Adobe site
to get your free Reader.
|
