|
|
Board accepts standard SOICs. Mount
one 14, or 16 pin, or two 8 pin ICs. Foil areas accept devices across line, or in line
with foil modifications. The Single-In-Line (SIP) pins on .100 centers provides
compatibility with breadboards, solderless breadboards, and sockets.
|
|
PDF PRINTING NOTE: If your
printed version of this data sheet shows solid areas in place of graphics, or the graphics
do not appear correct, Try printing them with your printer set up for RASTER mode. Pdf files from this site work best with Adobe Acrobat
3.0 or Higher. See the " Get Acrobat" link at page bottom go to the Adobe site
to get your free Reader.
|
Simple FOIL
MODIFICATIONS extend options by adding mounting zones for devices or changing
interconnection arrangement.
See the HOW - TO page for useful hints and
suggestions on the use of Surfboards. |
