UNI-SIP™
SERIES 1000 UNIVERSAL
SIP MODULES
USE TO BUILD ARRAYS AND NETWORKS WITH LEADED PARTS
BUILD FUNCTIONAL CIRCUIT ELEMENTS AND SUB-ASSEMBLIES
|
Assemblies built on Uni-Sip 1000 series boards
|
Uni-Sip series 1000 models
offer an improvement over the use of traditional component headers, and are much easier to
build. These models can accept leaded components with centerlines of . 100,
. 200, and . 300 inch. Great for both prototype and
limited production and very handy to have in the lab.
|
STANDARD MODELS AVAILABLE FROM OUR DISTRIBUTORS
|
UNI-SIP FAMILY
PDF DATA SHEET
|
|
|
MODEL |
W (in.) |
H (in.) |
NO. PINS |
|
US-1006 |
.600 |
.500 |
6 |
|
US-1007 |
.700 |
" " |
7 |
|
US-1008 |
.800 |
" " |
8 |
|
US-1009 |
.900 |
" " |
9 |
|
US-1010 |
1.0 |
" " |
10 |
|
|
PDF PRINTING NOTE: If your
printed version of this data sheet shows solid areas in place of graphics, or the graphics
do not appear correct, Try printing them with your printer set up for RASTER mode. Pdf files from this site work best with Adobe Acrobat
3.0 or Higher. See the " Get Acrobat" link at page bottom go to the Adobe site
to get your free Reader.
|
CHECK OUT THE MASTER UNI-SIP KIT
MK-US-260
|
UNI-SIP BOARD SPECIFICATIONS |
BOARD
MATERIAL:
CIRCUITRY:
HOLES:
SIP PINS:
TOLERANCES:
|
G-10-FR-4 EPOXY GLASS
1 oz. Cu. 1 SIDE, SOLDER COATED
DRILLED .037 In. +- .003 in.
.100 in. CENTERS, SOLDERED IN PLACE
BOARD +- .020 in. typ. PIN OAL +- .020in. |
ALL DIMENSIONS
GIVEN IN INCHES |
|
