UNI-SIP™
SERIES 2000 UNIVERSAL
SIP MODULES
BUILD CUSTOM COMMON BUSS NETWORKS AND ARRAYS
ACCEPT LEADED PARTS WITH .1, .2, .3 and .4 CENTERS
|
Example assemblies built using Uni-Sip boards
|
The Uni-Sip 2000 series
provides centerlines for mounting a range of common leaded devices including resistors,
capacitors, diodes, Leds, ect. A common buss is provided and jumpers can determine
connections. The buss may also be cut to isolate components if desired. A truly versatile
pad and hole pattern for both prototype and limited production circuit fabrication.
|
STANDARD MODELS AVAILABLE FROM OUR DISTRIBUTORS
|
UNI-SIP FAMILY PDF DATA SHEET |
|
|
MODEL |
W (in.) |
H (in.) |
NO. PINS |
|
US-2006 |
.600 |
.600 |
6 |
|
US-2007 |
.700 |
" " |
7 |
|
US-2008 |
.800 |
" " |
8 |
|
US-2010 |
1.0 |
" " |
10 |
|
US-2012 |
1.2 |
" " |
12 |
|
|
PDF PRINTING NOTE: If your
printed version of this data sheet shows solid areas in place of graphics, or the graphics
do not appear correct, Try printing them with your printer set up for RASTER mode. Pdf files from this site work best with Adobe Acrobat
3.0 or Higher. See the " Get Acrobat" link at page bottom go to the Adobe site
to get your free Reader.
|
CHECK OUT THE UNI-SIP MASTER KIT MK-US-260
|
UNI-SIP BOARD SPECIFICATIONS |
BOARD
MATERIAL:
CIRCUITRY:
HOLES:
SIP PINS:
TOLERANCES:
|
G-10-FR-4 EPOXY GLASS
1 oz. Cu. 1 SIDE, SOLDER COATED
DRILLED .037 In. +- .003 in.
.100 in. CENTERS, SOLDERED IN PLACE
BOARD +- .020 in. typ. PIN OAL +- .020in. |
ALL DIMENSIONS
GIVEN IN INCHES |
|
