UNI-SIP™
SERIES 5000 UNIVERSAL SIP MODULES
ACCEPT DIPS ON .300, .400, and .600 CENTERS
|
 
Example assemblies built on 5000 series Uni-Sip
boards
|
The 5000 series features a
pad / hole pattern that allows both .3 and .6 wide dips to be accepted. The connection to
the SIP pins is defined by the user, and thus a wide range of possible circuit
configurations are possible. The largest boards in the product family, model US-5020 can
accept up to a .600 40 pin dip and provide 20 I/O connections via SIP pins on .100 in.
centers. Six standard models are available featuring 8, 10, 12, 14, 16, and 20 pin
versions. |
|
STANDARD
MODELS AVAILABLE FROM OUR DISTRIBUTORS
|
|
|
|
MODEL |
W
(in.) |
H
(in.) |
NO.
PINS |
|
US-5008 |
.800 |
1.3 |
8 |
|
US-5010 |
1.0 |
" " |
10 |
|
US-5012 |
1.2 |
" " |
12 |
|
US-5014 |
1.4 |
" " |
14 |
|
US-5016 |
1.6 |
" " |
16 |
|
US-5020 |
2.0 |
" " |
20 |
|
Use UNI-SIP boards as carriers for other SIP boards including Surfboards. The
Single-In-Line (SIP) pins on .100 inch centers give your assemblies
compatibility with
standard breadboards, solderless breadboards, and sockets. |
|
  |
UNI-SIP FAMILY PDF DATA SHEET
|
PDF PRINTING NOTE: If your
printed version of this data sheet shows solid areas in place of graphics, or the graphics
do not appear correct, Try printing them with your printer set up for RASTER mode. Pdf files from this site work best with Adobe Acrobat
3.0 or Higher. See the " Get Acrobat" link at page bottom go to the Adobe site
to get your free Reader.
|
CHECK OUT THE UNI-SIP MASTER ASSORTMENT KIT MK-US-260
|
UNI-SIP BOARD SPECIFICATIONS |
BOARD
MATERIAL:
CIRCUITRY:
HOLES:
SIP PINS:
TOLERANCES:
|
G-10-FR-4 EPOXY GLASS
1 oz. Cu. 1 SIDE, SOLDER COATED
DRILLED .037 In. +- .003 in.
.100 in. CENTERS, SOLDERED IN PLACE
BOARD +- .020 in. typ. PIN OAL +- .020in. |
ALL DIMENSIONS
GIVEN IN INCHES |
|
