6100 GROUP
MODELS
6103, 6106, 6109, 6112, 6115
|
|
The
6100 group offers variation of the universal pad concept found on the
6000 group. Primarily intended for use with Transistor circuits, other 3
terminal devices may be accepted as well. Simple foil modifications (see
below), can make provisions for bias resistors where desired, or other
devices as the circuit application may require.
|
The above 5 models are standard and available from
our distributors.
|
Similar to the 6000
group, the design of the 6100 series provides universal mounting zones
for 2 and three terminal devices. In this design the top land is
isolated in each repeat of the pattern and is connected directly to a
pin. |
|
|
MODEL |
W (in.) |
H (in.) |
NO. PINS |
|
6103 |
.300 |
.500 |
3 |
|
6106 |
.600 |
.500 |
6 |
|
6109 |
.900 |
.500 |
9 |
|
6112 |
1.2 |
.500 |
12 |
|
6115 |
1.5 |
.500 |
15 |
6100
GROUP PDF DATA SHEET |
Simple, easy to make foil modifications expand layout and circuit
options.
HOW-TO:
FOIL MODIFICATIONS |
|
.View
the PDF data sheet for full details including Pin dimensions, overall
tolerances, and board specifications.
|
|
PDF PRINTING NOTE: If your
printed version of this data sheet shows solid areas in place of graphics, or the graphics
do not appear correct, Try printing them with your printer set up for RASTER mode. Pdf files from this site work best with Adobe Acrobat
3.0 or Higher. See the " Get Acrobat" link at page bottom go to the Adobe site
to get your free Reader.
|
See the HOW -
TO index for hints and ideas for building circuits
with Surfboards. |
JUST ADD PARTS
AND PLUG IN ™ |
